After a 3-day audit using 2nd Generation ATP, multiple opportunities for process improvement were identified. The results allowed operators to take immediate same-day action. This audit was successful in... Read More
Diagnosing inefficient biological phosphorus removal By leveraging LuminUltra’s mail-in GeneCount services, a wastewater treatment plant was able to identify the underlying causes of poor biological phosphorus removal in one... Read More
What’s inside: A steel producer in Taiwan, produces wastewater that is high in organics, ammonia, solids, and other waste products. The wastewater is treated on-site using a series of... Read More
Webinar on demand Using NGS to Optimize and Troubleshoot Wastewater Treatment Systems What to expect: Next-Generation Sequencing (NGS) data can be difficult to interpret, and as a result, the... Read More
Chemical engineer Dave Tracy provides insights into this common question, and provides resources on how to build a testing routine that works for you.... Read More
What’s inside: A municipally operated wastewater treatment plant receives a high proportion of industrial wastewater. The high proportion was resulting in frequent toxicity-driven upsets. They needed a solution for... Read More
A municipal wastewater treatment plant planning to carry out an expensive capital upgrade. This upgrade would improve treatment performance and bring the plant into compliance but was extremely expensive.... Read More
A refinery with an activated sludge wastewater treatment plant uses frac tanks to store and equalize waste streams that are potentially toxic to the plant biomass, including wastes from... Read More
Ammonia removal is a key metric for assessing wastewater treatment facility performance. This is because ammonia contributes to aquatic life toxicity. Furthermore, nitrogen, along with phosphorus, is a driver... Read More
Metagenomics through the incorporation of next generation sequencing (NGS) is changing the way wastewater treatment plants are monitored and understood. NGS can be used in aerobic and anaerobic... Read More
What’s inside: Over the course of a 6-week monitoring program, a Canadian starch mill utilized LuminUltra’s 2nd Generation ATP® wastewater test kits to identify the source of temperature-related upsets... Read More
A pulp and paper wastewater treatment plant was frequently experiencing bulking. As a result, they needed a strategy to detect bulking conditions sooner. Earlier detection would allow for actions... Read More
Introduction The activated sludge process is used to concentrate the biomass which naturally degrades carbonaceous substances found in most industrial and municipal wastewaters. A common practice in these plants... Read More
What’s inside: Problem: A municipal wastewater treatment plant investigated a sudden increase in fecal coliform exceedance events. Facility: Conventional activated sludge plant with chlorine disinfection in southeastern Australia receiving... Read More
Conventional activated sludge wastewater treatment plants (WWTP) operate with solids (mixed liquor suspended solids – MLSS) concentrations ranging from approximately 1500 to 5000 mg/L. In membrane bioreactors (MBRs),... Read More
Enhanced biological phosphorus removal (EBPR) was first documented in the early 1970’s. Traditionally it has been understood that EBPR requires a first stage anaerobic zone that is free... Read More
A Canadian paper manufacturer utilized LuminUltra’s wastewater test kits for one year and used the data to identify several opportunities for process improvement. Their findings are promising—in addition to... Read More
Establishing a routine monitoring plan for ATP will ensure that you’re able to take preventative action to reduce risk. Learn how here.... Read More
What’s inside: Over the course of a 1.5-month field experiment at a Canadian starch mill wastewater treatment process, LuminUltra Technologies demonstrated the use of its patent-pending Total Control ATP... Read More
Suspended growth systems, such as activated sludge, are a very common form of secondary wastewater treatment. The potential to optimize and improve the operation of such treatment plants... Read More
A colleague recently conveyed a conversation he’d had with an operator at a sewage treatment plant. Society tends to have an unfounded stigma of sewage treatment plants, so... Read More
UV treatment only recently became widely adopted in the water and wastewater treatment industries but the benefits of sun exposure for water purification have been acknowledged for thousands... Read More
What is sludge bulking? Sludge bulking is a severe problem that can plague activated sludge wastewater treatment plants (WWTP). It’s been estimated that 60% of activated sludge WWTP... Read More
Biological wastewater can be a be complex testing environment, but also offers the greatest opportunities for cost savings and overall optimization.... Read More
Wastewater treatment operations can encounter upset conditions that occur without warning when operators rely on conventional monitoring parameters. These upsets can cause nuisances such as poor biosolids settlability or... Read More
What’s inside This document provides a basic introduction to the value of information provided by ATP monitoring in wastewater treatment. This includes the various quantities that are determined and... Read More
Update your browser to view this website correctly. Update my browser now
